Free USA
Tekno EB410.2 1/10th 4WD Competition Electric Buggy Kit [TKR6502]

EB410.2 1/10th 4WD Competition Electric Buggy Kit





Sign in or create an account to earn 47 loyalty points with each purchase of this product!

Out of stock

Tekno RC is pleased to announce the next evolution in 1/10th scale 4WD buggy is here, the EB410.2. Weve set the bar in terms of build quality and easy to follow instructions, so expect the same here. Not only have many of the updated components from the ET410 been incorporated, but several all-new elements have been included to further improve handling and durability
Now included is a front end sway bar system along with new 15-degree low roll center spindle carriers. The suspension has been upgraded with new pistons and revised shock towers. In the rear, we have included new arms that allow front-mounted shocks, new adjustable roll center rear hubs, and a new, taller one-piece wing mount to help improve aerodynamics and roll characteristics. Durability has also been improved with a new spur gear, a front bulkhead brace, heavy-duty ABCD hinge pin braces, and larger 3.5mm inner hinge pins
We think you will agree, the EB410.2 represents a new level of performance, durability, and value to help you step higher on the podium
EB410.2 Key


  • Revised CNC 7075 Long Wear Chassis
  • New Larger 3.5mm HD Hinge Pins and Revised Hinge Pin Inserts
  • New ABCD Hinge Pin Braces w/ Revised Suspension Geometry
  • New Taller, Stronger One Piece Wing Mount w/ Height Adjustments
  • 13mm Big Bore Shocks w/ Revised cartridge and Cap Bushing
  • Ultra Secure Locking Spring Perch Design
  • New Rear Arms w/ Front Mounted Shocks
  • New Adjustable Roll Center Rear Hubs
  • New 15 Degree LRC Spindle Carriers
  • New Aluminum Front Camber Plate w/ Bulkhead Brace
  • Revised Material 81T Spur Gear
  • Front and Rear Sway Bars Now Included
  • Large Wheel Bearings and 6mm HD Stub Axles
  • Newly Optimized Reverse Bellcrank Steering System


  • Length: 393mm (without wing) up to 424mm (with wing)
  • Wheelbase: 283-294mm
  • Width: 246-250mm (optional hubs required)
  • Weight: 1630 (or less) to 1780g depending upon equipment used
  • Diff Ratio: F/R 16/40t, Center 81t
  • Battery tray
  • 96x47x26mm
  • Kit/RTR: Kit
  • Needed to Complete
  • 2/3 channel radio/transmitter
  • 1/10 scale ESC and motor system
  • High torque steering servo (at least 200oz/in)
  • 48 pitch 17 to 34 tooth pinion
  • 2s shorty LiPo battery (at least 4000mAh)
  • 1/10th scale 4WD buggy tires, wheels & CA glue
  • Paint for body
ConstructionUnassembled Kit
Drive Type4WD
Battery IncludedNot Included
Vehicle TypeBuggy
Power SourceElectric

No reviews at this time.


Write a review


Only registered users can report abuse.

Log in or create an account .
Only registered users can vote for a review.

Log in or create an account .