Free USA
Racing Fighter DT03 Chrome Metallic

Racing Fighter DT03 Chrome Metallic





Sign in or create an account to earn 13 loyalty points with each purchase of this product!

Out of stock

This is the Tamiya 1/10 scale, radio controlled, electric powered, 2WD
Racing Fighter Buggy Kit with Limited Edition Chrome Metallic Body Finish


  • Chassis: DT-03 plastic monocoque, with increased angle for better
  • Off-road potential
  • Drive: Rear wheel
  • Electronic Speed Control: Tamiya TBLE-02S, brushless compatible
  • Motor: Torque Tuned 540 brushed, longitudinally placed on chassis
  • Suspension: Four wheel double wishbone, front arms angled 25 for
  • Great off-road driving
  • Differential: Bevel gear
  • Body: Molded polycarbonate with chrome metallic plating
  • Shocks: Plastic body oil-filled DT-03 CVA type
  • Wheels: Black plastic front, 0.75" (19mm) wide, 2.4" (60mm) diameter
  • Rear, 1.4" (35mm) wide, 2.4" (60mm) diameter
  • Tires: Front, grooved 0.83" (21mm) wide, 3.1" (79mm) diameter
  • Rear, pin spike 1.5" (38mm) wide, 3.14" (80mm) diameter
  • Steering: Direct servo with tie rods
  • Camber: Non-adjustable, camber refers to the angle of the tops of the
  • Tires from vertical when viewed from front or behind vehicle
  • Caster: Adjustable, caster/toe-in refers to the angle of the front
  • Suspension when viewed from the side of the car in relation to the
  • Chassis

In the Package:

  • Tamiya Racing Fighter Buggy with brushed motor, ESC, chrome metallic
  • Plated polycarbonate plastic body, 17T pinion gear, tires, wheels,
  • Oil-filled shocks, decal sheet, and instruction manual


  • Vehicle-
  • Wheelbase: 11.3" (287mm)
  • Front Tread: 8.7" (221mm)
  • Rear Tread: 8.2" (208mm) distance between center of tires measured
  • Side-to-side
  • Body-
  • Length: 10.8" (276mm)
  • Width: 5.1" (130mm)
  • Height: 3" (76mm)


  • Radio: 2-channel with high torque steering servo, NOTE; This model
  • A receiver with an external antenna cable as the signal
  • Will be interfered with by the metal plated body. Radio systems
  • With external receiver antennas include the Futaba 3PV and 3PRKA
  • Battery: 7.2V stick pack with standard connector
  • Battery Charger: To match selected battery
  • AA batteries, paint, building and track equipment


  • To Upgrade to Ball Bearings use:
  • Qty. Size Location Qty. Bearing Set
  • 4 5x11mm Gearbox 2 DTXC1547
  • 2 5x11mm Front Axles 1 DTXC1547
  • 2 5x11mm Rear Axles 1 DTXC1547
ConstructionUnassembled Kit
Drive Type2WD
Battery IncludedNot Included
Vehicle TypeBuggy
Power SourceElectric

No reviews at this time.


Write a review


Only registered users can report abuse.

Log in or create an account .
Only registered users can vote for a review.

Log in or create an account .