Free USA
Metal Dump Truck GF-01

Metal Dump Truck GF-01





Sign in or create an account to earn 19 loyalty points with each purchase of this product!

Out of stock

This is the Electric Powered, Radio Controlled 1/24 scale
Limited Edition Heavy Dump Truck Kit from Tamiya
Body parts are molded in black, with metal-plated chassis
parts and new sticker designs.


  • Chassis: GF-01 light weight monocoque resin with wheelie bar to
  • Prevent flipping over backward during wheelies
  • Drive: 4 wheel, dogbone driveline
  • Motor: Tamiya Sport Tuned RS-540 brushed, center mounted
  • Electronic Speed Control: TBLE-02
  • Differentials: Bevel gear type
  • Gearboxes: Sealed
  • Cab and Rear Bed: ABS plastic, black in color, bed may be displayed
  • In flat or raised position by changing the position of the two
  • Stays and snap pins in the body mounts. It is not advisable to put
  • Objects in the rear bed, or drive the model with the bed elevated
  • Bed is not remote controlled
  • Front Bumper: Spring loaded
  • Shocks: Plastic body friction, not oil-filled
  • Suspension: Four wheel independent double wishbone
  • Tires: Rubber, lug and pin spike 2.5" (65mm) wide, 4.5" (115mm)
  • Diameter
  • Wheels: Metal plated plastic 1.9" (49mm) diameter, 2.3" (58.5mm)
  • Wide, 12mm hex
  • Steering: Bell crank type
  • Camber: Non-adjustable, camber refers to the angle of the tops of the
  • Tires from vertical when viewed from front or behind vehicle
  • Steering Tie Rods: Adjustable, caster/toe-in refers to the
  • Angle of the front suspension when viewed from the side of the car
  • In relation to the chassis

In the Package:

  • Heavy Dump Truck Kit with Brushed Motor, ESC, Shocks, Decal Sheet,
  • Tires, Wheels, 18T Pinion Gear and Instruction Manual


  • Length: 13.8" (350mm)
  • Width: 10.6" (270mm)
  • Height: 8.3" (210mm)
  • Wheelbase: 6.8" (174mm)
  • Tread: 7.6" (194mm) distance between center of tires measured
  • Side-to-side


  • Radio: 2-channel with high-torque steering servo
  • Battery: 7.2V NiMh battery with Standard connector
  • Charger: To match selected battery
  • AA Cells: For transmitter
  • Building and Track Equipment


  • To upgrade to Ball Bearings use:
  • Qty. Size Location Qty. Bearing Set
  • 2 5x11mm Gearbox 1 DTXC1547
  • 2 5x11mm Large Counter Gear 1 DTXC1547
  • 2 5x11mm Medium Counter Gear 1 DTXC1547
  • 2 5x11mm Small Counter Gear 1 DTXC1547
  • 2 5x11mm Front Uprights 1 DTXC1547
  • 2 5x11mm Rear Uprights 1 DTXC1547
ConstructionReady-to-Run (RTR)
Drive Type4WD
Battery IncludedNot Included
Vehicle TypeTruck
Power SourceElectric

No reviews at this time.


Write a review


Only registered users can report abuse.

Log in or create an account .
Only registered users can vote for a review.

Log in or create an account .