Rc4wd 1/10 High Performance Smd Led Light Bar (75mm/3)

Rc4wd 1/10 High Performance Smd Led Light Bar (75mm/3)





Sign in or create an account to earn 3 loyalty points with each purchase of this product!

Out of stock

This is a all new High Performance Lightbar for any RC. Will make any project look better and add much needed lighting


  • Cast Molded Housing
  • Reversible "L" brackets to fit many applications
  • Adjustable "L" brackets for rotating light
  • 16 Individual LED bulbs
  • Super Bright Lighting
  • Vented on side to dissipate heat


  • Up to 11.1v lipo with use of a BEC to regulate voltage below 7.4 volts
  • Standard Receiver Plug
  • Connects to extra channel on receiver
  • 2mm Mounting Holes
  • Rated Output 32 Lumens
  • Overall length: 3.7in / 95mm
  • Light Bar width: 3.1in / 7.88mm
  • Overall height: 0.81in / 20.8mm
  • Light Bar height: 0.63in / 16.2mm
  • Weight: 1.09oz / 31g
  • Use medium grade threadlock on "L"bracket nut to prevent loss and to keep the light in position
  • Mounting hardware can be found here. M2 SHCS / M2 BHSC
  • While the lightbar comes with a standard receiver plug, this is only for ease of use. The receiver will not allow enough power for the lightbar and it will be dim. If you want the light to be bright, you will need to power it directly from your battery, or use a BEC to get more power to your receiver

No reviews at this time.


Write a review


Only registered users can report abuse.

Log in or create an account .
Only registered users can vote for a review.

Log in or create an account .