Hot Racing E-Z Adjust Aluminum 3-Shoe FlyWheel Kit - Traxxas [TRX100AC306]

E-Z Adjust Aluminum 3-Shoe FlyWheel Kit - Traxxas

TRX100AC306  

Hot Racing 

New  

$43.88

Sign in or create an account to earn 4 loyalty points with each purchase of this product!

Out of stock

Hot Racing 3-shoe clutch and flywheel with three tuning spring options for the Traxxas Revo, T-Maxx, Nitro Rustler, Nitro Sport, Nitro Stampede, and Jato (works with 2.5, 2.5R, and 3.3 engines)

Features:

  • Light weight flywheel constructed of CNC machined 6061-T6 aluminum, anodized blue
  • Spring steel clutch springs with three spring options: soft black (0.93mm), medium gold (0.99mm), hard silver (1.09mm)
  • CNC machined 7075-T6 aluminum clutch shoes, anodized silver
  • One lightened clutch shoe to slightly soften clutch engagement and reduce harsh clutch grab

In the Package:

  • One (1) flywheel
  • Three (3) clutch shoes
  • One (1) brass flywheel collet
  • Three (3) clutch spring sets (soft black, medium gold, hard silver)
  • One (1) nut
  • One (1) installation tool

Specifications:

  • Flywheel outside diameter: 1.38 inch (35.1mm)
  • Collet natural inside diameter: 0.28 inch (7.0mm)
  • Black spring wire size: 0.93mm
  • Gold spring wire size: 0.99mm
  • Silver spring wire size: 1.09mm

Requirements:

  • Installation: Use the provided tool and nut. The tool can be turned by inserting a small screwdriver or hex wrench through the hole in the end of the tool

Comments:

  • Changing springs:
  • 1.) Note orientation of shoes and springs
  • 2.) Remove steel shoe retainer plate by gently prying it off with a flat head screwdriver
  • 3.) Change springs and reinstall shoes and springs on the pivot pins
  • 4.) Insert tool into steel shoe retainer plate; tool has three nubs that engage with three openings in retainer plate
  • 5.) Align steel shoe retainer plate with clutch and, while providing downward pressure, rotate the tool counterclockwise until the retainer plate is fully inserted into clutch and aligned with shoe pivot pins. The tool can be turned by inserting a small screwdriver or hex wrench through the hole in the end of the tool

No reviews at this time.

 

Write a review


*



Only registered users can report abuse.

Log in or create an account .
Only registered users can vote for a review.

Log in or create an account .