Free USA
3pv R203gf 3pv W/R203gf Receiver Fhss

3pv R203gf 3pv W/R203gf Receiver Fhss

FUT01004353-3  

Futaba 

New  

$139.99

Sign in or create an account to earn 13 loyalty points with each purchase of this product!

Out of stock

This is the Futaba 3PV 3-Channel Radio System with the 3-Channel R203GF Receiver

Features:

  • FHSS/T-FHSS, S-FHSS protocols
  • Large, easy to read programming screen
  • Four wheel steering and brake mixing
  • Model data copy
  • Anti-lock brake system (ABS) function
  • R203GF 3-channel receiver is ideal for brushless ESCs and digital servos
  • DT3 selection
  • SW1
  • Throttle fail safe
  • Steering and throttle trim
  • Channel 4 trim
  • Sub trim
  • Steering dual rate adjustment
  • Steering and throttle end point adjustment
  • Channel 3 and 4 end point adjustment, and servo reversing
  • Steering and throttle exponential
  • Auto power off after ten minutes
  • One year limited warranty through Hobby Services beginning at date of purchase

In the Package:

  • Futaba 3PV 3-Channel Transmitter, 3-Channel R203GF Receiver, Instruction Manual

Specifications:

  • Transmitter; Transmitting Frequency: 2.4GHz band Power Requirement: Four AA cells Current Drain: 100mA or less Transmission Antenna: Dipole (built in) Communication Method: Two way T-FHSS, one way S-FHSS, FHSS operating system
  • R203GF Receiver, FUTL7603;
  • 1.54 x 0.91 x 0.33" (39 x 26 x 10mm) Weight: 0.28oz (8g) Operating Voltage: 4.8 - 7.4V (shared with servo) Battery Fail Safe Voltage: 3.8V Current Drain: 30mA at no signal
  • Battery fail safe voltage is set for 4-cell NiCd/ NiMh battery
  • Battery F/S does not work properly when other type of battery is used
  • Antenna length: 7.5" (190.5mm)

Requirements:

  • AA Batteries: Four for transmitter (may also be powered by the Futaba HT5F1800B 6V NiMh pack FUTM1482, or the Hobbico LiFe 6.6V 1900mAh pack, HCAM6521

Comments:

  • For an optional charger, you can use FUTM1832, or if you already have a charger and need a charge lead Futaba Support can sell you part number- HSP29615. (requires soldering on the correct charger plugs)

No reviews at this time.

 

Write a review


*



Only registered users can report abuse.

Log in or create an account .
Only registered users can vote for a review.

Log in or create an account .