Sale! Free USA
1/18 Rally Car RTR FPV w/Camera/Goggles/Monitor

1/18 Rally Car RTR FPV w/Camera/Goggles/Monitor







Sign in or create an account to earn 16 loyalty points with each purchase of this product!

Out of stock

Additional Technical Info Will Be Added When It Becomes Available.
Dromida brand Electric Powered, Radio Controlled, 1/18 Scale
Ready to Run FPV Rally Car with Camera from Dromida
600TVL FPV Video Camera
25mW 40-Channel 5 Band 5.8GHz Video Transmitter
Tactic FPV-RM2 40-channel, 5.8GHz FPV
monitor with 4.3 LCD and Micro Memory Card Port
Tactic FPV-G1 Goggles


  • Video Monitor: Tactic FPV-RM2 40-channel, 5.8GHz FPV monitor
  • (TACZ5152) with 4.3 (109mm) LCD and micro memory card port and
  • Sun shield, powered by 1S 3.7V 1400mAh LiPo battery (included)
  • Memory card port accepts up to 32GB memory card, not included
  • Video Transmitter: 25mW 40-channel, 5-band 5.8GHz
  • Camera: Factory Installed 600TVL FPV
  • Goggles: Tactic FPV-G1 Goggles (TACZ5200)
  • Chassis: Plastic construction with countersunk screw holes
  • Drive: Four wheel shaft
  • Differentials: Bevel gear type
  • Motor: Factory-installed Torque 370 motor with aluminum mount
  • Radio: Tactic D100 2-channel with RE-18 waterproof receiver and
  • Speed control, and DS100 waterproof steering servo with servo saver
  • For precise steering control, steering and throttle trims and dual
  • Rates, servo reversing LEDs for monitoring power levels
  • Rally Car Battery: 6-cell, 1300mAh NiMh
  • Battery Charger: USB for NiMh battery
  • Body: Printed and decaled molded polycarbonate
  • Shocks: New shorter design for better control
  • Shock Towers: Composite plastic
  • Tires: High-grip rubber
  • Front Bumper: Foam
  • Ball Bearings: Full set included

In the Package:

  • RTR FPV Rally Car with Camera, Transmitter, Monitor, Goggles, LiPo
  • Battery for Monitor, NiMh Battery for Car, Motor, Radio System,
  • USB NiMh Charger, Sun Shield, Trimmed Body, Micro USB Charge Lead,
  • 4 AA Batteries for Transmitter, Instruction Manual


  • Length: 10.9 (277mm)
  • Width: 5.1 (130mm)
  • Height: 4.25 (108mm)
  • Weight w/Battery: 1.3lb (590g)
  • Wheelbase: 6.7 (170mm)


  • Track and Maintenance Equipment


  • For increased speed Dromida offers a brushless Conversion Kit
  • (DIDC1152) that includes a 5300Kv brushless Motor, 25A ESC, and
  • Other upgraded components. The Dromida 2S 7.4V 1600mAh battery
  • (DIDC1134) is recommended for best results and highest speed with
  • This conversion kit
  • Do not use a LiPo battery with the stock ESC. The stock ESC does
  • Not have Low Voltage Cutoff, and will damage the LiPo battery
  • For replacement or to upgrade to ball bearings use:
  • Qty. Size Location Qty. Bearing Set
  • 4 8x12mm Fr Uprights 2 DIDC1071
  • 4 8x12mm Rear Uprights 2 DIDC1071
  • 2 8x12mm Fr Diff 1 DIDC1071
  • 2 8x12mm Rear Diff 1 DIDC1071
  • 1 8x12mm Spur Gear 1 DIDC1071
  • 1 6x10mm Spur Gear 1 DIDC1070
  • 1 6x10mm Driveshaft 1 DIDC1070

No reviews at this time.


Write a review


Only registered users can report abuse.

Log in or create an account .
Only registered users can vote for a review.

Log in or create an account .